The new complete hygienic solution

The constant flow of trolleys and machinery.... hostile environment conditions...the hustle and bustle of pedestrian traffic...when specifying or selecting flooring and walling for busy traffic and vulnerable environments, the maintenance of high standards of  hygiene and impact resistance will be high on your list of priorities.

The fact that Altro provides flooring, walling and ceiling solutions is a major advantage; you can integrate your design and construction using proven and compatible products of which are available from one source.

Altro Whiterock hygienic PVC cladding systems offer the complete and low maintenance solution for a wide range of applications. The development of hygienic coatings is a logical extension of Altro's activity in supplying this high performance solution.

Why AltroGuard wall and ceiling coating systems 

• Meet a range of demanding hygiene protection and decorative requirements

• Altrosan integral biocide inhibits the growth of a wide range of bacteria, moulds and yeasts on the cured surface

• Cured coatings can withstand temperatures in the range of -50⁰C to +80⁰C (allow sevens day application before commissioning)

• Unaffected by UV light and can breathe, thus avoiding blistering or delamination

• Rapid drying time and taint-free once fully cured for minimum downtime

• Very easy to clean and, if required, can also be steam or pressure cleaned             (cleaning instructions are available)

• Versatile enough to provide different levels of impact and scratch resistance

• Colour co-ordinated to match Altro Whiterock, which may be used in adjacent areas requiring the highest level of impact resistance.

AltroGuard systems include the following components

AltroGuard Bioclean

A biocidal wash (EN certified) for cleaning and decontaminating surfaces prior to application of coating and for cleaning coated surfaces during their  lifetime.

AltroGuard Flexibase

A flexible base coat which permits some substrate movement without cracking. This also allows some bridging of existing hairline cracks

AltroGuard Acrylicoat

An acrylic top coat to produce a tough, elastic and mark-resistant surface. For general purpose use and is applied over the base coat as a two or three coat application. It can also be used as a stand alone finish on sound existing surfaces, in less demanding environments.

AltroGuard Polyucoat

A PU top coat for a very tough but flexible film with very good resistance to scratching, impacts and chemicals

AltroGuard Consolidating Primer

For applications to porous and friable/dusty surfaces. It is a single part primer which can be spray or roller applied

AltroGuard Tile Primer

For use on non porous areas such as glazed ceramic tiles, high gloss painted surfaces etc. It is a two part, water based, epoxy resin coating, best applied by bush or roller.

Accessories

Lightweight glass fibre scrim for a smooth finish when used on cracked or damaged surfaces. For bridging cracks, use a proprietary sealant such as AltroMastic 100

Ice

Dove

Linen

Sunrise

Seaform

Barley

White